The quantity of lubricant required for the engine of a Toyota Highlander to operate optimally is a vital specification for car upkeep. This amount, sometimes measured in quarts or liters, ensures enough lubrication, cooling, and cleansing throughout the engine, immediately influencing its efficiency and longevity. The particular quantity wanted varies relying on the engine kind and mannequin 12 months of the car.
Sustaining the proper engine lubricant stage is paramount to forestall engine injury, optimize gas effectivity, and guarantee compliance with guarantee necessities. Inadequate lubricant can result in elevated friction and warmth, probably inflicting engine seizure. Conversely, overfilling can lead to points akin to foaming and decreased engine energy. Understanding this specification permits car house owners to carry out routine upkeep successfully and confidently.
The following sections will delve into the elements influencing this required quantity, typical values for various Highlander mannequin years and engine configurations, procedures for checking and replenishing the lubricant, and potential penalties of improper upkeep on this space.
1. Engine Technology
The engine technology considerably influences the required engine lubricant quantity in a Toyota Highlander. Every technology introduces design modifications, technological developments, and modifications to engine elements, immediately impacting the lubricant system’s necessities.
-
Engine Design Evolution
Every successive engine technology typically incorporates design modifications geared toward enhancing effectivity, decreasing emissions, and enhancing efficiency. These modifications can alter the interior dimensions of the engine, influencing the lubricant capability wanted to adequately lubricate all transferring elements. For example, a redesigned oil pan or modifications to the interior oil galleries can have an effect on the full quantity required.
-
Technological Developments
Newer engine generations typically characteristic superior applied sciences like direct injection, variable valve timing, and turbocharging. These applied sciences can impression the thermal load on the lubricant and the calls for positioned on its efficiency. Consequently, the required lubricant quantity is perhaps adjusted to make sure enough cooling and safety below these extra demanding circumstances.
-
Materials Modifications
The supplies utilized in engine development additionally evolve with every technology. Lighter supplies, akin to aluminum alloys, might require totally different lubricant properties and volumes in comparison with older, heavier supplies like forged iron. The thermal enlargement traits of those supplies can affect lubricant consumption and necessitate particular quantity changes.
-
Oil Filter Compatibility
Whereas circuitously the engine, modifications to the engine technology regularly coincide with modifications to the oil filter design and measurement. A bigger oil filter will inherently enhance the general system quantity required throughout an oil change. The filter specification is subsequently intertwined with the engine technology and must be thought-about alongside the engine’s particular wants.
In abstract, the engine technology is a key determinant of the proper lubricant quantity for a Toyota Highlander. Design modifications, technological developments, and materials modifications, all contribute to variations in lubricant capability throughout totally different engine generations. Correct identification of the engine technology and adherence to the producer’s suggestions are essential for sustaining optimum engine well being.
2. Mannequin Yr
The mannequin 12 months of a Toyota Highlander immediately correlates with its engine lubricant capability. Automakers typically introduce engine revisions, updates, or fully new powerplants inside particular mannequin 12 months ranges. These modifications immediately have an effect on the amount of lubricant required for optimum engine operation. Consulting the proprietor’s guide for the exact mannequin 12 months is essential as a result of counting on basic data can result in incorrect lubricant ranges, inflicting potential engine injury.
For instance, a Toyota Highlander manufactured in 2015 with a particular engine might require a distinct amount of lubricant than the identical mannequin manufactured in 2018, even when each make the most of the identical engine household. This distinction can come up resulting from refined inner modifications throughout the engine block, modifications within the oil pan design, or variations within the oil filter measurement. Ignoring these mannequin year-specific necessities throughout upkeep immediately dangers overfilling or underfilling the engine, impacting its lubrication, cooling, and general efficiency.
Consequently, precisely figuring out the mannequin 12 months of the Toyota Highlander is an indispensable step in figuring out the proper lubricant capability. Whereas similarities might exist throughout mannequin years, particular technical bulletins and manufacturer-recommended upkeep schedules tailor-made to every 12 months should be consulted. Neglecting to confirm this element introduces vital potential for error and antagonistic penalties for the engine’s long-term well being.
3. Engine Dimension
Engine measurement, measured in liters or cubic centimeters, immediately influences the engine lubricant capability required for a Toyota Highlander. A bigger engine inherently possesses extra inner elements, better floor space, and elevated thermal output, all of which demand a correspondingly bigger quantity of lubricant to make sure enough safety.
-
Cylinder Quantity and Lubrication Wants
Engines with bigger cylinder volumes necessitate extra lubricant to adequately coat the cylinder partitions, pistons, and connecting rods. Elevated combustion chamber measurement additionally generates greater temperatures, requiring a better quantity of lubricant for efficient cooling and warmth dissipation. An inadequate lubricant provide can result in elevated friction, put on, and potential engine seizure.
-
Floor Space of Inside Elements
A bigger engine possesses a better complete floor space throughout all inner elements, together with the crankshaft, camshafts, and bearings. These surfaces require fixed lubrication to reduce friction and stop metal-to-metal contact. The elevated floor space of a bigger engine immediately interprets to a better lubricant quantity requirement to keep up an enough protecting movie on all transferring elements.
-
Oil Pan Capability and Design
The scale and design of the oil pan are intrinsically linked to the engine measurement and lubricant capability. Bigger engines sometimes require bigger oil pans to accommodate the elevated lubricant quantity mandatory for optimum operation. The oil pan design additionally influences the lubricant’s skill to chill and settle, additional affecting the general quantity wanted to keep up enough lubrication below numerous driving circumstances.
-
Cooling Necessities
Bigger engines generate extra warmth as a byproduct of combustion. Engine lubricant performs an important position in dissipating this warmth, and a bigger quantity of lubricant is required to successfully handle the elevated thermal load. Insufficient lubricant quantity can result in overheating, which accelerates lubricant degradation and will increase the danger of engine injury.
In conclusion, the dimensions of the engine is a main determinant of the engine lubricant capability in a Toyota Highlander. The elevated lubrication and cooling calls for of bigger engines necessitate a correspondingly bigger quantity of lubricant to make sure optimum efficiency, longevity, and safety towards put on and injury. Ignoring the producer’s specified lubricant capability primarily based on engine measurement can result in extreme engine issues.
4. Filter Change
The act of fixing the oil filter in a Toyota Highlander immediately influences the general engine lubricant capability required throughout an oil change process. A brand new filter, by its nature, is initially dry and can take in a amount of the recent lubricant launched into the system. Consequently, when performing an oil change, the amount specified within the proprietor’s guide relies on the idea {that a} new filter can be put in concurrently.
Failure to interchange the filter when altering the lubricant compromises the effectiveness of the oil change. The previous filter, already saturated with contaminants, will proceed to flow into these impurities by the engine. Furthermore, if the lubricant is changed with out altering the filter, the full quantity added will doubtless be lower than the desired capability for an oil change with a brand new filter. This underfilling can result in insufficient lubrication, elevated engine temperatures, and accelerated put on on inner elements. For instance, if a Highlander requires 6 quarts of lubricant with a brand new filter, merely draining the previous lubricant and including 6 quarts with out altering the filter will lead to an overfilled system after the prevailing filter media change into saturated with the brand new oil. Conversely, if the oil is drained and solely 5 quarts are added, with out filter change, there may be risk for inadequate oil to completely lubricate and funky the engine elements.
Due to this fact, the filter change element is inextricable from the desired lubricant capability. Correct upkeep necessitates adhering to the producer’s suggestions for each lubricant kind and amount, all the time accounting for the amount required to saturate a brand new filter. Neglecting this interconnectedness can undermine the advantages of an oil change, probably resulting in engine injury and decreased lifespan. In abstract, the filter change considerably impacts lubricant ranges and general engine well being in the course of the upkeep means of Toyota Highlanders.
5. Local weather Components
Ambient temperature and driving circumstances related to various climates exert a direct affect on engine lubricant efficiency and, consequently, the optimum lubricant quantity inside a Toyota Highlander. Excessive chilly or warmth can alter lubricant viscosity and its skill to successfully lubricate engine elements. In colder climates, lubricant tends to thicken, growing resistance to circulation and probably hindering its skill to achieve important engine elements throughout startup. Conversely, in extraordinarily sizzling climates, lubricant can skinny out, decreasing its movie power and growing the danger of metal-to-metal contact.
For instance, a Highlander regularly operated in sub-zero temperatures might profit from utilizing a decrease viscosity lubricant, akin to a 0W-20 grade, even when a 5W-30 grade is mostly really helpful. This decrease viscosity promotes simpler chilly begins and quicker lubricant circulation. Equally, a Highlander subjected to constantly excessive ambient temperatures and heavy towing may require a better viscosity lubricant, akin to a 5W-40 grade, to keep up enough movie power and stop lubricant breakdown. These climatic concerns affect not simply the kind of lubricant chosen but in addition impression the monitoring of lubricant ranges, as greater temperatures can speed up lubricant consumption.
In conclusion, climatic elements considerably impression the lubricant’s operational effectivity. Choosing the suitable viscosity grade and adhering to a extra frequent lubricant stage test schedule are important for sustaining optimum engine well being in Toyota Highlanders working in excessive temperature circumstances. Disregarding these climate-related influences on lubricant choice and monitoring can result in untimely engine put on and decreased efficiency. Due to this fact, local weather turns into a important parameter in figuring out not simply the lubricant itself but in addition not directly impacting the perceived “toyota highlander oil capability,” as optimum ranges may should be extra actively maintained.
6. Driving Habits
Driving habits exert a substantial affect on the required engine lubricant quantity upkeep in a Toyota Highlander. Aggressive driving types, frequent brief journeys, and sustained high-speed operation place elevated stress on the engine and lubricant, thereby affecting consumption charges and probably necessitating extra frequent monitoring and replenishment.
-
Aggressive Acceleration and Braking
Ordinary exhausting acceleration and braking cycles elevate engine temperatures and enhance shear forces appearing on the lubricant. This results in accelerated lubricant breakdown and elevated consumption resulting from vaporization and blow-by previous the piston rings. Consequently, Highlanders subjected to frequent aggressive driving might exhibit a quicker decline in lubricant stage, requiring extra frequent checks and top-offs to keep up the proper working quantity.
-
Frequent Quick Journeys
Repeated brief journeys, significantly in colder climate, stop the engine from reaching its optimum working temperature. This incomplete warm-up part leads to gas dilution of the lubricant, decreasing its effectiveness and probably resulting in sludge formation. Gas dilution decreases the lubricant’s skill to guard engine elements, which might necessitate extra frequent oil modifications to keep up correct lubrication and stop untimely put on; thereby altering the efficient timeframe for perfect “toyota highlander oil capability” upkeep.
-
Sustained Excessive-Pace Operation
Extended high-speed driving, akin to on highways, topics the engine to constantly excessive masses and temperatures. This elevated thermal stress accelerates lubricant oxidation and vaporization, leading to greater consumption charges. Highlanders usually pushed at excessive speeds might require extra frequent lubricant stage checks and top-offs to compensate for this elevated consumption and guarantee enough lubrication.
-
Towing and Heavy Masses
Frequently towing trailers or carrying heavy masses locations vital extra pressure on the engine. This elevated load interprets to greater working temperatures and better calls for on the lubricant’s skill to guard towards put on. The elevated temperatures additionally speed up lubricant breakdown and consumption. Consequently, Highlanders regularly used for towing or hauling heavy masses might require extra frequent lubricant modifications and stage checks to keep up optimum engine well being.
In abstract, driving habits have a demonstrable impression on engine lubricant consumption and the frequency with which lubricant ranges needs to be monitored and adjusted in a Toyota Highlander. Drivers with aggressive driving types, those that primarily take brief journeys, and people who regularly drive at excessive speeds or tow heavy masses needs to be significantly vigilant in checking their lubricant ranges and adhering to a extra rigorous upkeep schedule. Ignoring these elements can result in untimely engine put on and decreased efficiency, highlighting the significance of tailoring upkeep practices to particular person driving habits and circumstances associated to “toyota highlander oil capability”.
7. Upkeep Schedule
The upkeep schedule for a Toyota Highlander immediately dictates the intervals at which engine lubricant stage checks and modifications ought to happen, thereby making certain the engine constantly operates with the desired quantity of lubricant. Deviation from the really helpful upkeep schedule immediately impacts the engine’s skill to operate optimally. For instance, if the schedule mandates an oil change each 5,000 miles, adhering to this interval helps stop lubricant degradation and the buildup of contaminants that may scale back lubricant effectiveness. Suspending the oil change can result in sludge buildup, decreased lubricant circulation, and accelerated engine put on. The upkeep schedule successfully defines the parameters inside which the desired lubricant quantity is maintained at its peak efficiency stage.
The upkeep schedule additionally accounts for various driving circumstances. A “extreme service” schedule, sometimes really helpful for autos operated below harsh circumstances akin to frequent towing, off-road driving, or excessive temperatures, typically necessitates extra frequent lubricant modifications. It’s because these circumstances speed up lubricant breakdown and enhance the danger of engine injury. Ignoring the “extreme service” suggestions and adhering solely to the “regular” upkeep schedule can lead to inadequate lubricant safety and untimely engine put on, significantly in conditions the place greater ranges of consumption might happen. The schedule acts as a safeguard, adjusting the frequency of lubricant replenishment primarily based on the operational calls for positioned on the engine.
In abstract, the upkeep schedule and lubricant quantity are inextricably linked. The schedule supplies a framework for sustaining the suitable lubricant stage and high quality over time, adapting to totally different working circumstances. Constant adherence to the producer’s really helpful upkeep schedule is crucial for preserving engine well being, maximizing efficiency, and increasing the lifespan of the Toyota Highlander’s engine, immediately related to the efficiency and adherence of the “toyota highlander oil capability”. Neglecting this schedule introduces vital dangers of engine injury and decreased reliability.
8. Lubricant Sort
The engine lubricant kind specified for a Toyota Highlander is intrinsically linked to the required engine quantity. Utilizing an incorrect lubricant grade or specification can compromise engine safety, resulting in potential injury and decreased effectivity. The lubricant’s viscosity, detergent properties, and artificial composition all contribute to its skill to successfully lubricate, cool, and clear the engine, immediately influencing the optimum quantity wanted.
-
Viscosity Grade and Movie Energy
The viscosity grade, akin to 0W-20 or 5W-30, signifies the lubricant’s resistance to circulation at totally different temperatures. Utilizing a viscosity grade that’s too low for the working circumstances can lead to inadequate movie power, growing the danger of metal-to-metal contact and put on. Conversely, utilizing a viscosity grade that’s too excessive can hinder lubricant circulation, significantly throughout chilly begins, and scale back gas effectivity. The proper viscosity grade ensures optimum lubrication on the specified quantity, maximizing engine safety throughout a spread of working circumstances. For example, utilizing a 10W-40 in a more moderen Highlander designed for 0W-20 might not flow into adequately throughout chilly begins, even when the full quantity is right.
-
Detergent and Dispersant Properties
Lubricants include detergent and dispersant components that assist to maintain the engine clear by suspending contaminants and stopping sludge formation. These components affect the lubricant’s skill to keep up its efficiency over time. A lubricant with insufficient detergent properties can result in the buildup of deposits, decreasing its effectiveness and probably affecting its skill to correctly lubricate all engine elements. The proper kind of lubricant, with acceptable detergent properties, will keep cleanliness, making certain that the desired lubricant quantity is adequate for optimum engine operate. The components play a key position in oil life, and improper upkeep could cause points even when the preliminary “toyota highlander oil capability” was right.
-
Artificial vs. Standard Lubricants
Artificial lubricants usually provide superior efficiency in comparison with standard lubricants. Artificial lubricants exhibit better resistance to thermal breakdown, present higher safety towards put on, and keep their viscosity over a wider temperature vary. Utilizing an artificial lubricant in a Toyota Highlander can prolong oil change intervals and enhance engine safety, significantly below demanding driving circumstances. Whereas the amount might stay according to producer specs, the longer lifespan and enhanced safety of artificial lubricants can translate to improved engine longevity, thus not directly optimizing the effectiveness of the desired “toyota highlander oil capability”.
-
API and ILSAC Requirements
Lubricants assembly the American Petroleum Institute (API) and Worldwide Lubricant Standardization and Approval Committee (ILSAC) requirements are formulated to fulfill particular efficiency necessities. These requirements be certain that the lubricant supplies enough safety towards put on, corrosion, and sludge formation. Utilizing a lubricant that doesn’t meet the really helpful API or ILSAC commonplace can compromise engine safety and probably void the car’s guarantee. Compliance with these requirements ensures that the lubricant will carry out as supposed on the specified quantity, maximizing engine well being and reliability consistent with the “toyota highlander oil capability” requirements.
In conclusion, the collection of the suitable lubricant kind is paramount to making sure optimum engine safety and efficiency in a Toyota Highlander, which is crucial to the effectiveness and administration of the “toyota highlander oil capability”. Utilizing the proper viscosity grade, detergent properties, artificial composition, and API/ILSAC requirements ensures that the desired lubricant quantity is adequate for sustaining engine well being, maximizing effectivity, and stopping untimely put on. Failure to stick to the producer’s lubricant suggestions can result in engine injury and decreased reliability, highlighting the important position of lubricant kind together with sustaining the proper lubricant quantity.
9. Measurement Items
Correct dedication of engine lubricant quantity in a Toyota Highlander necessitates a transparent understanding and constant utility of measurement items. Discrepancies or errors in unit conversion can result in overfilling or underfilling, each of which may have detrimental results on engine efficiency and longevity. Due to this fact, correct consideration to measurement items is important when performing lubricant stage checks and modifications.
-
Quarts (US) and Liters (Metric)
The first items of measurement for engine lubricant quantity are quarts (US customary items) and liters (metric items). The particular quantity required for a Toyota Highlander oil change is usually supplied in considered one of these items within the proprietor’s guide or service specs. Correct conversion between these items is crucial to keep away from errors. For instance, mistaking quarts for liters, or vice-versa, when including lubricant can simply lead to vital overfilling or underfilling. Understanding that 1 US quart is roughly equal to 0.946 liters permits for correct conversions throughout upkeep.
-
Quantity Markings on Lubricant Containers
Lubricant containers are sometimes marked with quantity graduations in each quarts and liters to facilitate correct measurement. Nevertheless, visible estimation primarily based on these markings could be imprecise, significantly when including smaller increments. Utilizing a devoted measuring container or a graduated funnel can enhance accuracy when including lubricant, decreasing the danger of overfilling or underfilling. Reliance on estimation could cause points on the subject of correct “toyota highlander oil capability” readings.
-
Dipstick Calibration and Interpretation
The engine lubricant dipstick supplies a visible indication of the lubricant stage within the engine. The dipstick is calibrated with markings indicating the minimal and most acceptable ranges. Right interpretation of those markings requires cautious consideration and consciousness of the particular dipstick design. Studying the dipstick incorrectly, akin to misinterpreting the placement of the “full” mark, can result in including an excessive amount of or too little lubricant. The dipstick readings should all the time be referenced again to the said quantity vary supplied by the producer.
-
Impression of Inaccurate Measurement
Inaccurate measurement of lubricant quantity can result in a spread of issues. Overfilling the engine could cause lubricant foaming, decreased engine energy, and potential injury to seals and gaskets. Underfilling can lead to insufficient lubrication, elevated friction, and accelerated put on on engine elements. Even small discrepancies in lubricant quantity can have long-term penalties for engine well being. Correct consideration to items, subsequently, is paramount in attaining goal “toyota highlander oil capability”.
In conclusion, the proper utility of measurement items is indispensable for sustaining the suitable engine lubricant quantity in a Toyota Highlander. Exact conversion between quarts and liters, cautious consideration to quantity markings on containers, and correct interpretation of dipstick readings are all essential for avoiding errors. Adherence to those measurement finest practices helps guarantee optimum engine efficiency, longevity, and reliability and promotes correct requirements for “toyota highlander oil capability”.
Continuously Requested Questions
This part addresses frequent inquiries and clarifies essential features associated to engine lubricant quantity in Toyota Highlander autos. Correct data is important for correct upkeep and optimum engine efficiency.
Query 1: What’s the specified engine lubricant quantity for my Toyota Highlander?
The particular engine lubricant quantity varies relying on the engine kind and mannequin 12 months of the Toyota Highlander. Seek the advice of the proprietor’s guide or a good service database to find out the proper quantity for the car. Generic suggestions needs to be prevented, as they’ll result in overfilling or underfilling.
Query 2: Is it acceptable to deviate from the producer’s really helpful lubricant quantity?
Deviating from the producer’s really helpful lubricant quantity is mostly not advisable. Overfilling could cause lubricant foaming and seal injury, whereas underfilling can result in insufficient lubrication and accelerated engine put on. Adherence to the desired quantity is crucial for optimum engine well being.
Query 3: Does the engine lubricant quantity change relying on the kind of oil filter used?
Whereas the engine lubricant quantity stays constant for a given engine, altering the oil filter does impression the complete quantity required throughout an oil change. A brand new, dry filter will take in some lubricant, necessitating a barely greater quantity in comparison with merely replenishing drained lubricant with no filter change.
Query 4: How regularly ought to the engine lubricant stage be checked in a Toyota Highlander?
The engine lubricant stage needs to be checked usually, ideally at every gas fill-up or at the least as soon as a month. Extra frequent checks are really helpful for autos operated below extreme circumstances, akin to frequent towing or high-speed driving. Early detection of lubricant loss can stop vital engine injury.
Query 5: What are the potential penalties of overfilling the engine with lubricant?
Overfilling the engine with lubricant can result in a spread of issues, together with lubricant foaming, decreased engine energy, elevated strain on seals and gaskets (probably inflicting leaks), and elevated lubricant consumption. Extra lubricant may also be compelled into the crankcase air flow system, resulting in additional issues.
Query 6: What are the potential penalties of underfilling the engine with lubricant?
Underfilling the engine with lubricant can lead to insufficient lubrication, elevated friction between transferring elements, elevated engine temperatures, accelerated put on, and potential engine seizure. Even a small lubricant deficiency can have long-term detrimental results on engine well being and longevity.
Sustaining the proper engine lubricant quantity is a important side of Toyota Highlander possession. Adhering to producer suggestions, checking lubricant ranges usually, and addressing any points promptly are important for making certain optimum engine efficiency and increasing the car’s lifespan.
The next part will cowl sensible procedures for checking and replenishing engine lubricant in Toyota Highlander autos.
Important Concerns for Sustaining Optimum Engine Lubricant Ranges
Sustaining the proper engine lubricant amount in a Toyota Highlander is essential for engine well being and longevity. Adhering to the next tips is crucial to make sure correct operate.
Tip 1: Seek the advice of the Proprietor’s Guide. The proprietor’s guide supplies the definitive lubricant capability for the particular engine and mannequin 12 months. This data supersedes any generic suggestions discovered elsewhere.
Tip 2: Use a High quality Measuring Container. Keep away from estimating lubricant quantity. Make use of a graduated container or funnel to precisely measure the required amount.
Tip 3: Exchange the Oil Filter. At all times exchange the oil filter throughout an oil change. The filter will take in a portion of the brand new lubricant, impacting the full quantity required.
Tip 4: Enable for Lubricant Settlement. After including the lubricant, wait a number of minutes earlier than checking the extent with the dipstick. This enables the lubricant to settle and supplies a extra correct studying.
Tip 5: Learn the Dipstick Appropriately. Make sure the car is parked on a stage floor. Wipe the dipstick clear, reinsert it totally, after which withdraw it to test the lubricant stage. Interpret the markings precisely.
Tip 6: Monitor Consumption Charges. Concentrate on the car’s typical lubricant consumption charge. Autos pushed below extreme circumstances might eat lubricant at a better charge than these pushed below regular circumstances.
Tip 7: Tackle Leaks Promptly. Any indicators of lubricant leaks needs to be addressed instantly. Leaks can result in vital lubricant loss and potential engine injury.
Persistently implementing these practices will reduce the danger of overfilling or underfilling the engine, preserving optimum “toyota highlander oil capability”.
The following part will present a concluding abstract of the important thing factors mentioned on this article.
Conclusion
This text has extensively explored the significance of sustaining the proper engine lubricant quantity, immediately associated to the phrase “toyota highlander oil capability”, in Toyota Highlander autos. It has addressed numerous elements influencing the particular quantity required, together with engine technology, mannequin 12 months, engine measurement, filter change necessities, local weather circumstances, driving habits, upkeep schedules, and the lubricant kind utilized. Correct measurement, utilizing correct items and strategies, was additionally highlighted as a vital component in making certain optimum engine efficiency and longevity.
Understanding and adhering to the producer’s specified lubricant necessities for a Toyota Highlander is a basic side of accountable car possession. Neglecting this important upkeep component can result in untimely engine put on, decreased efficiency, and probably catastrophic engine injury. Due to this fact, prioritizing correct lubricant stage monitoring, adherence to really helpful upkeep schedules, and the usage of acceptable lubricant varieties stays important for maximizing the lifespan and reliability of the car’s engine, making certain optimum efficiency below its specified “toyota highlander oil capability.”
